Fixing Links do not have descriptive text

 

To fix this issue, follow these simple steps: 

1) Let's assume that you have already analyzed your website and that you got the recommendation from page speed.

2) Make sure you have access to the WordPress back office with administrator account access.

3) Go to Pages > All Pages > Edit with Elementor, where the error is located.

4) Once the elementor builder has successfully executed the page, select the "Button" and click "Add Nofollow" to check. Click "Update" to save changes.

 

I hope your SEO issue is resolved! ^_^

Restoring Usb Flash Drive Capacity

If you are using Windows 10, here is the way you can launch command prompt after logging in as administrator.

1) Click Windows button and type "cmd" without quote.

2) Right-click on Command Prompt and click Run as administrator.

 

Follow the command in sequence: don't forget to plugin the USB!

A) Type "DISKPART" without quote to execute DiskPart program

B) Type "LIST DISK" to  Display all available disk

NOTE: Below the Disk ### are the assigned name on your USB stick & other storage devices.
ACTION: Select the Disk 1 of your USB that contain 0B capacity.

C) Type "SELECT DISK 1" 

D) Type "DETAIL DISK" the info shown will confirm the correctness of your selection

E) Type "CLEAN ALL" the entire usb stick will be overwritten with zeros

F) Type "CREATE PARTITION PRIMARY" to create a primary partition on the USB stick

 

I hope your USB got restored! ^_^

 

Note: Applicable also for manual formatting.

• FORMAT FS=NTFS format the partition
• ACTIVE the partition can contain operating system startup files
• ASSIGN the next available letter is assigned to the USB stick
• EXIT Close DISKPART program
• EXIT Close command shell

Command Line for Computer Network

Renaming Network Adapter
1) Syntax: netsh interface ipv4 show interface

2) Syntax:
netsh interface set interface name = "Local Area Connection 5" newname = "iSCSI1"

3) Syntax: netsh interface ipv4 show interface 

 

 

 

 

 

Check network Adapter Details
Syntax: ipconfig/all - lists out all the IP Configuration details of your Windows based machine. This would include both the Hardware MAC Addresses as well as your IP Address associated with that MAC.

 

 

 

 

 

 

 

 

 

 

 

Deployment and Troubleshooting
1) Syntax: ipconfig/flushdns - System clears the cache of name to ip entries and reloads them from the connected DNS server.

 

 2) Syntax: ipconfig/release - executed to force the client to immediately give up its lease by sending the server a DHCP release notification which updates the server's status information and marks the old client's IP address as "available"

3) Syntax: ipconfig/renew - Executed to request a new IP address

4) Syntax: getmac − Displays the MAC addresses for your network cards.

5) Syntax: hostname - Prints the hostname or computer name.

6) Syntax: netstat − Displays immediate networks stats, such as open ports and routing table information.

7) Syntax: ping − Used for simple network troubleshooting.

8) Syntax: netsh int ip set address “local area connection” static 192.168.1.100 255.255.255.0 192.168.1.1 1

9) Syntax: netsh int ip set address “local area connection” dhcp

10) Syntax: net view - View computers on the network.

Winsock Catalog Reset and Solve Network Problem in Windows OS

netsh winsock reset is useful command that you can use in Microsoft Windows to reset winsock catalog back to default setting or clean state. You can try this if you are having following Internet access or networking problems but still failing to resolve the problem after trying all other suggestions.

•     Internet or network problem after removing the adware, spyware, virus, worm, trojan horse, etc.
•     Loss network connection after installing/uninstalling adware, spyware, antispam, vpn, firewall or other networking programs
•      Unable to access any webpage or can only access some webpages
•      Pop-up error window with network related problem description
•     No network connectivity due to registry errors
•     DNS lookup problem
•     Fail to renew the network adapter’s IP address or other DHCP errors
•      Network connectivity issue with limited or no connections message
•     Other networking problems

 
If you are using Windows 10, here is the way you can launch command prompt after logging in as administrator.

1) Click Windows button and type "cmd" without quote.

2) Right-click on Command Prompt and click Run as administrator. 

3) Type netsh winsock reset in command prompt and hit ENTER button.

4) Restart the computer to complete the reset, after that try to access the network or Internet again.

 For technical assistance, you may contact https://www.informatenterprising.com/

Network Cable Configuration T568B/T568A

1) RJ45 Pinout T-568B Cable Wiring(Straight Through)

2) RJ45 Pinout T-568B and T-568A Cable Wiring(Cross Over)

 

Please subscribe to the YouTube channel for more technical tutorials: Welearn360

How to add IP to the white list in Sucuri

1. Open any browser. i.e., Chrome, Firefox, Safari, or Edge.

2.  Visit https://sucuri.net/

3. Click Login at the top right corner of the website, input your username and password, and hit the login button.

 

 

4. The page will show if the account has successfully logged in.

 

 

 

5. To add an IP address to the white list, click Firewall > Access Control.

 

 

6. Set a white list for the IP address and duration of accessibility.

A) Allow IP address: type the public IP address that you want to give access to the website. ex. 172.1.1.1

B) Under the drop-down menu, select the duration of permission.

C) Click the "Allow" button to save.

 

 

You're all set! To test the effect of the configuration, visit the website.